滑铁卢华人, 水城百事论坛 http://www.kwcg.ca/forum/ 水城社区-Kitchener, Waterloo, Cambridge & Guelph华人的网上家园 en 要小心， 最好不要用。国内的220v是220v对零线，这边的240v是120v对120v。 Reply by KWHVAC, Friday, November 26, 2010, 15:16:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=47719 http://www.kwcg.ca/forum/index.php?id=47719 Fri, 26 Nov 2010 15:16:44 GMT KWHVAC 自己动手改造时应该符合安省和加拿大的用电规范：Electric Code。如果从240V插座上引出明线，必须采取符合规定的防机械损伤措施。用240VAC插座，并明显标示电压等级和线路出处，以防自己和以后房主误用导致危险，除了Stove和Dryer，不建议住家装设永久性240VAC 插座。我是持牌电工。 Reply by unknown, Thursday, November 25, 2010, 19:30:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=47594 http://www.kwcg.ca/forum/index.php?id=47594 Thu, 25 Nov 2010 19:30:43 GMT unknown 我认为可以，不过把国内带来的电器插头改成这边的炉头插头好一些。这种插头保险，有零线地和专门的接地线。用国内的电器的话，将零线地悬空就行了。 Reply by vsh, Wednesday, November 24, 2010, 17:58:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=47458 http://www.kwcg.ca/forum/index.php?id=47458 Wed, 24 Nov 2010 17:58:23 GMT vsh 这边标准电压应该是240V, 60Hz，因为历史原因，需要用分相器分成相位相反的两相120V输入到住宅中 Reply by wolf, Wednesday, November 24, 2010, 16:56:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=47449 http://www.kwcg.ca/forum/index.php?id=47449 Wed, 24 Nov 2010 16:56:39 GMT wolf 我也很疑惑，有的dryer写的是220V输入，有的是240V输入。 Reply by feng, Wednesday, November 24, 2010, 16:50:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=47447 http://www.kwcg.ca/forum/index.php?id=47447 Wed, 24 Nov 2010 16:50:42 GMT feng 国内是220，240会不会烧坏 Reply by aeiou, Wednesday, November 24, 2010, 16:25:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=47436 http://www.kwcg.ca/forum/index.php?id=47436 Wed, 24 Nov 2010 16:25:25 GMT aeiou 有个问题问渔夫，我们这里的stove和dryer用的是不是240V的插座？能不能用来给国内带来的电器供电？ Posting by feng, Wednesday, November 24, 2010, 15:56:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=47430 http://www.kwcg.ca/forum/index.php?id=47430 Wed, 24 Nov 2010 15:56:44 GMT feng