滑铁卢华人, 水城百事论坛 http://www.kwcg.ca/forum/ 水城社区-Kitchener, Waterloo, Cambridge & Guelph华人的网上家园 en 一般说来router不用调，直接动态分配地址就好了。 Reply by 838, Wednesday, May 19, 2010, 16:28:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=22703 http://www.kwcg.ca/forum/index.php?id=22703 Wed, 19 May 2010 16:28:53 GMT 838 也就是说Route设成出厂设置就可以？ Reply by helloworld, Wednesday, May 19, 2010, 16:19:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=22697 http://www.kwcg.ca/forum/index.php?id=22697 Wed, 19 May 2010 16:19:09 GMT helloworld 不需要，acanac本身的modem都设好的，你只需要连接上就好了。 Reply by 838, Wednesday, May 19, 2010, 16:17:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=22696 http://www.kwcg.ca/forum/index.php?id=22696 Wed, 19 May 2010 16:17:42 GMT 838 路由器是不是设成PPPoe, 输入用户密码? Reply by helloworld, Wednesday, May 19, 2010, 16:12:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=22692 http://www.kwcg.ca/forum/index.php?id=22692 Wed, 19 May 2010 16:12:11 GMT helloworld 我就是你说的这个设置，一点问题都没有 Reply by 838, Wednesday, May 19, 2010, 16:03:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=22684 http://www.kwcg.ca/forum/index.php?id=22684 Wed, 19 May 2010 16:03:26 GMT 838 有人用Acanac吗，直接接电脑可以上网，一旦连上Linksys 的无线路由器，怎么也连不上 Posting by helloworld, Wednesday, May 19, 2010, 15:51:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=22679 http://www.kwcg.ca/forum/index.php?id=22679 Wed, 19 May 2010 15:51:33 GMT helloworld