滑铁卢华人, 水城百事论坛

in Toronto, i paid 10 dollars and the problem got fixed, but two months later, it happened again.

匿名 — Fri, 06 Feb 2026 17:57:24 GMT

Reply by 匿名, Friday, February 06, 2026, 17:57:

[ No text ]

绝对良心商家

匿名 — Fri, 06 Feb 2026 17:36:47 GMT

Reply by 匿名, Friday, February 06, 2026, 17:36:

[ No text ]

正规西人车行，不是4S店

匿名 — Fri, 06 Feb 2026 17:27:46 GMT

Reply by 匿名, Friday, February 06, 2026, 17:27:

[ No text ]

而且是税后。

匿名 — Fri, 06 Feb 2026 14:37:01 GMT

Reply by 匿名, Friday, February 06, 2026, 14:37:

[ No text ]

不会这么便宜吧

匿名 — Thu, 05 Feb 2026 19:29:36 GMT

Reply by 匿名, Thursday, February 05, 2026, 19:29:

[ No text ]

你没有那么大的本事，我的车换了雪胎后有点跑偏，只能下次换雪胎时找车行做动平衡

匿名 — Thu, 05 Feb 2026 19:11:25 GMT

Reply by 匿名, Thursday, February 05, 2026, 19:11:

[ No text ]

危险啊。一般有经验的，千斤顶起来后，都要再塞个轮胎，或砖石下去，高度基本就比贴地躺高些，不受力，但在意外时，可以保护一下身体，别砸瘫痪了。

不知道说明白没有，希望大家注意安全 — Thu, 05 Feb 2026 16:31:29 GMT

Reply by 不知道说明白没有，希望大家注意安全, Thursday, February 05, 2026, 16:31:

[ No text ]

自己搞不定，约了车行，价格两位数，不夸张。

匿名 — Thu, 05 Feb 2026 16:09:09 GMT

Reply by 匿名, Thursday, February 05, 2026, 16:09:

[ No text ]

自己换冬胎怎么找平衡

匿名 — Wed, 04 Feb 2026 18:19:54 GMT

Reply by 匿名, Wednesday, February 04, 2026, 18:19:

[ No text ]

当时没想到索赔，去重新要了一个

匿名 — Wed, 04 Feb 2026 18:12:36 GMT

Reply by 匿名, Wednesday, February 04, 2026, 18:12:

[ No text ]

你走大运了，这个你可以索赔的啊

匿名 — Wed, 04 Feb 2026 17:50:27 GMT

Reply by 匿名, Wednesday, February 04, 2026, 17:50:

[ No text ]

千万别太信任千斤顶，我之前的奥迪在我换后轮备用胎的时候千斤顶竟然断掉，吓我一身冷汗。

匿名 — Wed, 04 Feb 2026 17:42:06 GMT

Reply by 匿名, Wednesday, February 04, 2026, 17:42:

[ No text ]

换机油用的那个RAMP，把车开上去就可以换了

匿名 — Wed, 04 Feb 2026 16:26:17 GMT

Reply by 匿名, Wednesday, February 04, 2026, 16:26:

[ No text ]

防啥锈啊，这东西你过两年换一个不就好了，如果实在担心，自己就去轮胎店买一罐防锈漆给喷上。也可以丢到浓硫酸里泡一会

匿名 — Wed, 04 Feb 2026 16:25:19 GMT

Reply by 匿名, Wednesday, February 04, 2026, 16:25:

[ No text ]

关键是用户自己没法把车吊起来。:-D

匿名 — Wed, 04 Feb 2026 15:20:06 GMT

Reply by 匿名, Wednesday, February 04, 2026, 15:20:

[ No text ]

防锈怎么做

匿名 — Wed, 04 Feb 2026 15:14:57 GMT

Reply by 匿名, Wednesday, February 04, 2026, 15:14:

[ No text ]

再不济也可以买一块镀锌铁皮，用大剪刀剪成类似的形状，然后打几个洞换上也是可以的

匿名 — Wed, 04 Feb 2026 14:29:57 GMT

Reply by 匿名, Wednesday, February 04, 2026, 14:29:

[ No text ]

买一块换上，或者拿个大垫片垫着螺丝压住锈蚀的破洞铝板

匿名 — Wed, 04 Feb 2026 14:28:42 GMT

Reply by 匿名, Wednesday, February 04, 2026, 14:28:

[ No text ]

车厂还是修你500以上

匿名 — Wed, 04 Feb 2026 14:26:11 GMT

Reply by 匿名, Wednesday, February 04, 2026, 14:26:

[ No text ]

最近发现汽车底盘一块铝制隔热板因为固定位锈蚀而脱落。虽然三颗螺丝都失效了，但没在开车时掉在路上。症状是开车时，有时敲击排气管有异响。估计很早就发生了，最近才发现原来是这个原因。维修也不复杂。

仅供参考 — Wed, 04 Feb 2026 13:19:06 GMT

Posting by 仅供参考, Wednesday, February 04, 2026, 13:19:

[ No text ]