滑铁卢华人, 水城百事论坛 http://www.kwcg.ca/forum/ 水城社区-Kitchener, Waterloo, Cambridge & Guelph华人的网上家园 en 谢谢了各位,我找了老傅来看看. Reply by 小R, Monday, February 13, 2012, 17:00:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=102809 http://www.kwcg.ca/forum/index.php?id=102809 Mon, 13 Feb 2012 17:00:07 GMT 小R Home Depot买一种叫E-Z Ancor的自攻螺丝,可承重30磅，2元5分钟搞定。 Reply by Toyota, Monday, February 13, 2012, 10:03:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=102745 http://www.kwcg.ca/forum/index.php?id=102745 Mon, 13 Feb 2012 10:03:48 GMT Toyota 请参见广告区的“便民安装维修” http://www.kwcg.ca/?action-viewnews-itemid-7578 Reply by unknown, Monday, February 13, 2012, 03:17:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=102742 http://www.kwcg.ca/forum/index.php?id=102742 Mon, 13 Feb 2012 03:17:08 GMT unknown 后面的立柱在窗帘支架后的可能性可以说是少之又少。要是按照STUD去装窗帘基本不可能。关键是选好膨胀塑料头和螺丝的尺寸。 Reply by TD, Sunday, February 12, 2012, 15:00:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=102717 http://www.kwcg.ca/forum/index.php?id=102717 Sun, 12 Feb 2012 15:00:29 GMT TD 已经告诉你了，用stud sensors测一下实柱。 Reply by littlecat, Saturday, February 11, 2012, 23:01:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=102670 http://www.kwcg.ca/forum/index.php?id=102670 Sat, 11 Feb 2012 23:01:30 GMT littlecat 如果仅是一般的窗帘，不是很重的话，我觉得没必要找什么地方，至少我就没有找。也许你打的眼太大了。一般我会打比那螺母小一号的眼，得用锤子敲才能将螺母塞进去。 Reply by 或是多点支撑也许会好些, Saturday, February 11, 2012, 22:33:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=102667 http://www.kwcg.ca/forum/index.php?id=102667 Sat, 11 Feb 2012 22:33:38 GMT 或是多点支撑也许会好些 一般装修的都有 Reply by 借一个, Saturday, February 11, 2012, 22:27:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=102665 http://www.kwcg.ca/forum/index.php?id=102665 Sat, 11 Feb 2012 22:27:22 GMT 借一个 看来没找对地方，有种工具可以测到墙里什么地方是实心的，然后钉涨钉。 Reply by :-(, Saturday, February 11, 2012, 22:15:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=102663 http://www.kwcg.ca/forum/index.php?id=102663 Sat, 11 Feb 2012 22:15:36 GMT :-( 你要找到柱子，要用stud sensor去找，然后把钉子钉在柱子上就不会掉了 Reply by littlecat, Saturday, February 11, 2012, 17:32:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=102630 http://www.kwcg.ca/forum/index.php?id=102630 Sat, 11 Feb 2012 17:32:12 GMT littlecat 是这样的，但是用几下就松动了。 Reply by 小R, Saturday, February 11, 2012, 16:45:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=102625 http://www.kwcg.ca/forum/index.php?id=102625 Sat, 11 Feb 2012 16:45:49 GMT 小R 自己装就好，只是别用钉子，用膨胀螺丝才好。 Reply by 电钻也会很有帮助, Saturday, February 11, 2012, 13:51:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=102619 http://www.kwcg.ca/forum/index.php?id=102619 Sat, 11 Feb 2012 13:51:54 GMT 电钻也会很有帮助 谁可以装窗帘？最简单的那种，只是我们装了4，5次都掉下来了，希望能找个专业的给装结实了。 Posting by 小R, Saturday, February 11, 2012, 12:28:

[ No text ]

]]> http://www.kwcg.ca/forum/index.php?id=102612 http://www.kwcg.ca/forum/index.php?id=102612 Sat, 11 Feb 2012 12:28:26 GMT 小R